- Messages
- 626
- Reaction score
- 1,279
- Location
- kentucky
- RC Driving Style
- Bashing
- Racing
- Crawling
- Scale Builder
How do I do this to my rc tho?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Look at you f450 rear.....
How do I do this to my rc tho?
That's what I was thinking too. If the rockers were attached solid to the bar, you could use a 2mm spring rod for the bar and have a built in sway bar. This would be a fun project for a trophy truck, desert buggy or something similar....the rocker assembly can probably double as an anti sway bar setup if linked with a torsion bar.
yeah I'm seeing this from responses, light years from this personally,if your a master fabricator you could do something like this. but you wont be seeing this anytime soon..
So NO
start mocking me up one bro lolThat's what I was thinking too. If the rockers were attached solid to the bar, you could use a 2mm spring rod for the bar and have a built in sway bar. This would be a fun project for a trophy truck, desert buggy or something similar.
lol that might as well be in german for me, i undderstand like 4 words and only half the numbers. fabrication is not for me lololol104 Pcs 40 cm Stainless Steel Spring Wire Music Wire, 12 Different Straight Full Hard Spring Steel Wire, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1 mm, 1.2 mm, 1.4 mm, 1.6 mm, 1.8 mm, 2 mm, 3 mm https://a.co/d/e2MItwl
White Polystyrene Flexible Plastic Board Sheet 8" x 10" (.020 Thick) Styrene Sheet, Ideal for Modeling Projects, Displays, Plastic Sheets for Crafts, Styrene Sheets Durable Plastic Sheet (5-Pack) https://a.co/d/eVu85lu
Plastruct Plastic Weld w/applicator 2oz Bottle https://a.co/d/0PyxNWf
Plus some link bars for the triangulated top links, or a single one for a 3-link setup. I would probably go 4 myself just for the added durability. Some short links for the connection from the rockers to the axles, shocks, a bit of hardware and you're set.
Don't think I've ever had the need to tig weld on an RC car. And 3" tubes might be a bit big for this application.and people are Super TIG welders . this as I said will never happen.. axel tubes will need to be shortened then all this other work then those 3" power tubes under the bed..LOL
Proud of ya. But that has absolutely nothing to do with this conversation.I spent 50 years in the Welding business. from smaw.mig.tig.short arc pulse arc. I can do it all in joining metal together
I was instructed by the Best or the best from NRC certified welders to shipbuilders and not the Titanic that was hot riveted